Code of Federal Regulations · Section

§ 18.13 — Certification Plate

30 C.F.R. § 18.13

View:

Each certified component shall be identified by a certification plate attached to the component in a manner acceptable to MSHA. The method of attachment shall not impair any explosion-proof characteristics of the component. The plate shall be of serviceable material, acceptable, to MSHA, and shall contain the following:

Certified as complying with the applicable requirements of 30 CFR part ________.

Certification No.________.

The blank spaces shall be filled with appropriate designations. Inclusion of the information on a company name plate will be permitted provided the plate is made of material acceptable to MSHA.

30 C.F.R. § 18.12 30 C.F.R. § 18.14

Authorizing Statute