Code of Federal Regulations · Subpart
Subpart KKKK — Standards Of Performance For Stationary Combustion Turbines
40 C.F.R. pt. 60, subpt. KKKK
- § 60.4300 What Is The Purpose Of This Subpart?
- § 60.4305 Does This Subpart Apply To My Stationary Combustion Turbine?
- § 60.4310 What Types Of Operations Are Exempt From These Standards Of Performance?
- § 60.4315 What Pollutants Are Regulated By This Subpart?
- § 60.4320 What Emission Limits Must I Meet For Nitrogen Oxides (nox)?
- § 60.4325 What Emission Limits Must I Meet For Nox If My Turbine Burns Both Natural Gas And Distillate Oil (or Some Other Combination Of Fuels)?
- § 60.4330 What Emission Limits Must I Meet For Sulfur Dioxide (so2)?
- § 60.4331 What Are The Requirements For Operating A Stationary Temporary Combustion Turbine?
- § 60.4333 What Are My General Requirements For Complying With This Subpart?
- § 60.4335 How Do I Demonstrate Compliance For Nox If I Use Water Or Steam Injection?
- § 60.4340 How Do I Demonstrate Continuous Compliance For Nox If I Do Not Use Water Or Steam Injection?
- § 60.4345 What Are The Requirements For The Continuous Emission Monitoring System Equipment, If I Choose To Use This Option?
- § 60.4350 How Do I Use Data From The Continuous Emission Monitoring Equipment To Identify Excess Emissions?
- § 60.4355 How Do I Establish And Document A Proper Parameter Monitoring Plan?
- § 60.4360 How Do I Determine The Total Sulfur Content Of The Turbine's Combustion Fuel?
- § 60.4365 How Can I Be Exempted From Monitoring The Total Sulfur Content Of The Fuel?
- § 60.4370 How Often Must I Determine The Sulfur Content Of The Fuel?
- § 60.4375 What Reports Must I Submit?
- § 60.4380 How Are Excess Emissions And Monitor Downtime Defined For Nox?
- § 60.4385 How Are Excess Emissions And Monitoring Downtime Defined For So2?
- § 60.4390 What Are My Reporting Requirements If I Operate An Emergency Combustion Turbine Or A Research And Development Turbine?
- § 60.4395 What Must I Submit My Reports?
- § 60.4400 How Do I Conduct The Initial And Subsequent Performance Tests, Regarding Nox?
- § 60.4405 How Do I Perform The Initial Performance Test If I Have Chosen To Install A Nox-diluent Cems?
- § 60.4410 How Do I Establish A Valid Parameter Range If I Have Chosen To Continuously Monitor Parameters?
- § 60.4415 How Do I Conduct The Initial And Subsequent Performance Tests For Sulfur?
- § 60.4420 What Definitions Apply To This Subpart?