§ 468.13 — New Source Performance Standards (nsps)

The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:

(a) Subpart A—Hot Rolling Spent Lubricant NSPS.

(b) Subpart A—Cold Rolling Spent Lubricant NSPS.

(c) Subpart A—Drawing Spent Lubricant NSPS.

(d) Subpart A—Solution Heat Treatment NSPS.

(e) Subpart A—Extrusion Heat Treatment NSPS.

(f) Subpart A—Annealing with Water NSPS.

(g) Subpart A—Annealing with Oil NSPS.

(h) Subpart A—Alkaline Cleaning Rinse NSPS.

(i) Subpart A—Alkaline Cleaning Rinse for Forged Parts NSPS.

(j) Subpart A—Alkaline Cleaning Bath NSPS.

(k) Subpart A—Pickling Rinse NSPS.

(l) Subpart A—Pickling Rinse for Forged Parts NSPS.

(m) Subpart A—Pickling Bath NSPS.

(n) Subpart A—Pickling Fume Scrubber NSPS.

(o) Subpart A—Tumbling or Burnishing NSPS.

(p) Subpart A—Surface Coating NSPS.

(q) Subpart A—Miscellaneous Waste Streams NSPS.