§ 471.73 — New Source Performance Standards (nsps)

Any new source subject to this subpart must achieve the following new source performance standards (NSPS). The mass of pollutants in the uranium forming process wastewater shall not exceed the following values:

(a) Extrusion spent lubricants—subpart G—NSPS. There shall be no discharge of process wastewater pollutants.

(b) Extrusion tool contact cooling water.

Subpart G—NSPS

(c) Heat treatment contact cooling water.

Subpart G—NSPS

(d) Forging spent lubricants—subpart G—NSPS. There shall be no discharge of process wastewater pollutants.

(e) Surface treatment spent baths.

Subpart G—NSPS

(f) Surface treatment rinse.

Subpart G—NSPS

(g) Wet air pollution control scrubber blowdown.

Subpart G—NSPS

(h) Sawing or grinding spent emulsions.

Subpart G—NSPS

(i) Sawing or grinding contact cooling water.

Subpart G—NSPS

(j) Sawing or grinding rinse.

Subpart G—NSPS

(k) Area cleaning rinse.

Subpart G—NSPS

(l) Drum washwater.

Subpart G—NSPS

(m) Laundry washwater.

Subpart G—NSPS

(n) Degreasing spent solvents—subpart G—NSPS. There shall be no discharge of process waster pollutants.