§ 1090.310 — Diesel Fuel Additives Standards

(a) Except as specified in paragraph (b) and (c) of this section, diesel fuel additives blended into diesel fuel that is subject to the standards in § 1090.305 must have a sulfur concentration less than or equal to 15 ppm on a per-gallon basis.

(b) Diesel fuel additives do not have to comply with paragraph (a) of this section if all the following conditions are met:

(1) The additive is added to diesel fuel in a quantity less than 1.0 volume percent of the resultant mixture of additive and diesel fuel.

(2) The PTD for the diesel fuel additive complies with the requirements in § 1090.1120(b).

(3) The additive is not commercially available as a retail product for ultimate consumers.

(c) The provisions of this section do not apply to additives used in 500 ppm LM diesel fuel or ECA marine fuel.